Digitally Recording From A Cd/Md/Dat - Roland Edirol UR-80 Mode D'emploi

Recording audio

Digitally recording from a CD/MD/DAT

fig.digital.e
CD/MD/DAT player, etc.
Connect to either the OPTICAL
or COAXIAL IN as appropriate
for your device
Connections
Use the appropriate type of cable to make connections to the digital input jack (OPTICAL/COAXIAL).
Sampling frequency select switch
Set this to the same sampling frequency as selected in your recording software.
REC SOURCE button
Set this to DIGITAL (lit).
Other notes
Don't connect anything to input jacks you are not using.
* The UR-80 does not support professional digital audio formats.
Built-in sample rate converter
The sampling frequency of the signal being input from the digital input jack can be converted in
real time by the UR-80.
<Examples>
48 kHz → 44.1 kHz
32 kHz → 48 kHz
The digital signal will be converted into the frequency specified by the sampling frequency select
switch before it is recorded.
62
Set the sampling frequency
* Match the sampling frequencies of your recording
software and your digital audio playback device
Set REC SOURCE to
DIGITAL (lit)