Roland Edirol UR-80 Mode D'emploi page 45

Master Control section
Function buttons
Button
FADER BANK
ASSIGNMENT
WINDOW
[UNDO]
[SAVE]
* Button names in square brackets [ ] indicate that you press the button while holding down the SHIFT button.
fig.LogicMasterControl_50
Cursor buttons
These buttons perform the following functions.
Button
[SHIFT]+
[SHIFT]+
[SHIFT]+
[SHIFT]+
Function
BANK < Scroll the operated channel in steps of 8 channels.
BANK >
[CHANNEL <] Scroll the operated channel in steps of 1 channel.
[CHANNEL >]
Switch the parameters controlled by the Track Control knobs.
PAN Adjust the Pan/Angle of each channel. Use the left/right cursor buttons
to switch the Pan/Angle parameter to be adjusted.
SEND Adjust the Send Level of each channel. Use the up/down cursor buttons
to switch between send slots. Use the left/right cursor buttons to switch
the Send Level parameter to be adjusted.
[EQ] Adjust the EQ Gain of each channel. Use the up/down cursor buttons to
switch between equalizer bands. Use the left/right cursor buttons to
switch the EQ Gain parameter to be adjusted.
[TRACK] Adjust the track parameters of each channel. Use the left/right cursor
buttons to switch between parameters.
ARRANGE Switch the Arrangement window display on/off.
MIXER Switch the Track Mixer window display on/off.
Undo the preceding edit operation.
Save the current song to a file.
Function
When the Track Mixer is displayed, these
buttons select parameters or switch the send
slot or equalizer band according to the func-
tion assigned to the track control knobs.
Vertically shrink display
Vertically expand display
Horizontally shrink display
Horizontally expand display
Controlling your software
45