Sonar; Settings In Sonar - Roland Edirol UR-80 Mode D'emploi

SONAR

Memory set
Use PRESET.
Hold down the UR-80's MEMORY button and press Track Status button PRESET.
Software
You will need SONAR 2.0 or later, and the UR-80 Control Surface Plug-in.
The UR-80 Control Surface Plug-in is found in the SONAR Plugin folder of the included CD-ROM.
Double-click UR80CSP.EXE to start up the installer.
Follow the on-screen directions to install the software.

Settings in SONAR

1.
From the Options menu, choose Control Surfaces.
2.
In the Control Surfaces dialog box, click the
Surface.
fig.SONAR.e
3.
Specify the in port and out port.
Control Surface
EDIROL UR-80
For details on using SONAR, refer to the SONAR owner's manual.
button, and select "EDIROL UR-80" as the Control
In port
EDIROL UR-80 2
Out port
EDIROL UR-80
Controlling your software
33