Functions Assigned To The Controllers - Roland Edirol UR-80 Mode D'emploi

Controlling your software

Functions assigned to the controllers

Please affix the HUI labels to the included template sheet. The explanation below will follow these
settings.
[DP]...................... Indicates an operation for Digital Performer.
[PT] ...................... Indicates an operation for ProTools LE.
If neither of these symbols is shown, the operation applies to both systems.
Track Control section
Track faders
The faders control the mixer volume.
You can control the eight tracks of the selected track bank. Use the cursor buttons to switch track
banks.
Master fader
The master fader is not used.
Track Status buttons (TRACK STATUS/HQ PART)
These buttons switch the status of the track.
Mode
MUTE
SOLO
REC RDY
AUTO
Track Control knobs (TRACK/HQ CONTROL)
These knobs control track Pan, Send 1 level, and Send 2 level. Use the Assign button to select Pan,
Send 1 level, or Send 2 level.
The value will increase while the knob is turned toward the right, and will decrease while the knob
is turned toward the left. The change (increase/decrease) will stop when you return the knob to the
center position (Shuttle mode).
48
SELECT button status
OFF
GREEN
RED
ORANGE
Function
Switch track mute on/off.
On: lit
Off: unlit
Switch track solo on/off.
On: lit
Off: unlit
Switch track record-ready on/off.
On: lit
Off: unlit
Hold down this button and use the Automation Mode button
(AUTO MODE) to change the automation setting of the track.