Side Panel - Roland Edirol UR-80 Mode D'emploi

Names of Things and What They Do
26.
Phantom power switch (PHANTOM POWER)
This is an on/off switch for the phantom power that is supplied to the XLR type input jacks 1 and 2.
* The phantom power must be turned off unless you have connected a condenser mic that requires phantom
power. Malfunctions can occur if you supply phantom power to a dynamic mic or audio playback device. For
details on the specifications of your mic, refer to its owner's manual. (The UR-80's phantom power supply
provides a maximum of 10 mA at DC 48 V.)
27.
Security slot (
* http://www.kensington.com/

Side panel

fig.side
28.
Master output jacks (RCA phono type)
These are analog audio output jacks. You can connect them to your external monitor speaker
system.
29.
Headphone jack
You can connect a set of headphones to this jack. The headphone jack will output the same signal
as the master output jacks and digital output jacks. Sound will be output from the master output
jacks even if headphones are connected.
* Use the output volume knob of the Audio Control section to adjust the volume of the headphone jack and
master output jacks. It is not possible to adjust the volume that is output from the digital output jacks.
26
)
28 29