SICE S 65 E Manuel D'instructions page 115

savings programmes:
• optimised programme for fast vehicle wheels,
• optimised programme for slow vehicle wheels.
The status bar of the displayed screen will show:
• the Fast wheel icon, if the programme for fast vehicle wheels has been selected
• the Slow wheel icon, if the programme for slow vehicle wheels has been selected.
Note: each time the machine is switched on, if the WEIGHT REDUCTION suite has
been activated, the Fast wheel programme is automatically set.
At this point it is possible to perform the wheel balancing, using the required balancing
programme.
At the end of the spin, if the wheel balancing is not satisfactory, a screen will display the
values of the weights to be applied to the inner and outer sides of the rim.
If, on the other hand, the wheel balancing is satisfactory, the icons
in place of the weight values. Within the unbalance indicators, there are two semicircular
bars showing the residual torque unbalance level (left-hand indicator) and the residual
static unbalance level (right-hand indicator).
Operator's Manual S 65 E - S 65 E C
are displayed
115