SICE S 65 E Manuel D'instructions page 114

Exit key twice
- If a different working environment is recalled between one step of the OPT pro-
gramme and the next one, the OPT procedure always remains stored. Therefore,
going back to the start environment, the programme resumes the execution from
the point where it was interrupted. This situation is possible when the Temporary
Exit icon is selected.
WEIGHT REDUCTION is a suite containing 4 programmes:
1. Hidden Weight
2. Split Weight
3. OPT flash
4. Weight Reduction.
Note: the Hidden Weight, Split Weight and OPT Flash programmes are available even
when WEIGHT REDUCTION is not enabled.
To access this suite you must:
• select the Utility programmes icon,
• select the WEIGHT REDUCTION icon.
In this way you will access the main screen of WEIGHT REDUCTION, showing 4 icons:
the OPT Flash icon for the unbalance minimisation programme,
1.
2. the Balancing programme icon that unites all the available balancing programmes,
3. the Statistics icon, which visualises the statistics relating to the use of the Weight
Reduction programme,
4. the Weight Reduction icon for the slow or fast vehicles weight savings programmes.
If programme ALU 1P or ALU 2P has been set to "auto" mode, the Hidden weight icon
will also appear, while if the programme ALU MOTO has been set in "motorcycle" mode,
the Divide side weight icon will appear.
Note: for Balancing programmes refer to the BALANCING PROGRAMMES paragraph.
Note: for the using the OPT Flash programme, see the paragraph OPTIMISATION
PROGRAMME (OPT FLASH).
Weight savings programme (Weight Reduction)
This programme allows you to obtain the optimum balancing of the wheel, reducing the
quantity of weight to be applied to a minimum.
To access this programme you must:
select the Utility programmes icon,
•
• select the WEIGHT REDUCTION icon.
In this way you will access the main screen of WEIGHT REDUCTION, and the unbalance
values visualised will be automatically updated.
Selecting the Weight Reduction icon, it is possible to choose between 2 different weight
114
.
WEIGHT REDUCTION SUITE
Operator's Manual S 65 E - S 65 E C