Bar Code Entry - Medtronic ACT Plus Manuel De L'utilisateur

9. To confirm the entry, press [Enter].
10. To return to the "Add Lot Number" selection, select [Exit Add Selection].
When a control type has a single lot number entered and a second lot is to be
entered, the following variable function keys appear: [Add Lot/EXP Date],
[Remove Lot], [Edit Range] and [Exit to Quality Control Menu].
1. To add a second control lot for a cartridge type, select [Add Lot/EXP Date].
2. To enter the second lot number, see the instructions above (when there are
no lot numbers).
When there are 2 lot numbers entered for a control type, the following variable
function keys appear: [Toggle Active], [Remove Lot], [Edit Range], and [Exit to
Quality Control Menu].
To change the lot number of the active control:
1. Select [Toggle Active] to move the "
currently being used.
To remove a control lot:
1. Select [Remove Lot].
2. To select the lot to be removed, use the up/down arrows (↑↓) to toggle to the
appropriate lot number.
3. Select [Remove Selected Lot] to delete the selected control lot number.
To edit the range of an existing control lot:
1. Select [Edit Range].
2. To select the lot of the control to be edited, use the arrows to change the
highlighted lot.
3. Enter the range for the control.
4. To confirm the entry, press [Enter].

Bar Code Entry

From the Quality Control Menu:
1. Select [Control Lot].
When there is no or 1 lot number for a control type:
1. Scan the bar code on the control box. The lot number and expiration date will
automatically populate their respective fields.
2. To enter the range for the control, select [Set Range]. The format for entering
the control range is "lll-hhh," where "lll" is the low end and "hhh" is the high
end of the control range.
3. To confirm the entry, press [Enter].
4. To return to the Quality Control Menu, select [Exit to Quality Control Menu].
®
ACT Plus Operator's Manual
*
" to the control lot number that is
English 33