Bar Code Entry; Select Cartridge Type - Medtronic ACT Plus Manuel De L'utilisateur

To enter a User ID:
1. Select [User ID].
2. Enter the User ID using the numerical keypad.
3. For alpha entry, press the decimal point "." An alpha character will appear in
the User ID field.
4. To select a character, press the [A...Z] and [Z...A] keys until the desired
character is shown.
5. Select the decimal point again if you would like to enter another alpha
character or enter from the numeric keypad.
6. After entering the last alpha character or number of the User ID, press [Enter]
to confirm the ID.
7. A message will appear, "Load Cartridge, Close Actuator."
8. To return to the Main Menu, press [Main Menu]. A message will appear at the
top of the screen, "Verify Patient and User ID."

Bar Code Entry

From the Main Menu:
1. Select [Enter ID]. The Enter ID screen will appear with options for entering
Patient and User ID numbers.
To enter a Patient ID:
1. Select [Patient ID].
2. Scan the Patient ID from the patient band.
3. The Patient ID will appear in the upper right-hand corner of the Enter ID
screen.
To enter a User ID:
1. Select [User ID].
2. Scan the User ID from the user's badge.
3. A message will appear, "Load Cartridge, Close Actuator."
4. To return to the Main Menu, press [Main Menu]. A message will appear at the
top of the screen, "Verify Patient and User ID."

Select Cartridge Type

The cartridge type (including the electronic control) should be selected or verified
before each test.
From the Main Menu:
1. Select [Cartridge Type].
2. To view the complete list of choices, [HR-ACT], [LR-ACT], [HTC], [RACT],
[GPC], and [ACTtrac
3. To confirm the selection, press [Enter].
26 English
®
], continue to press [Cartridge Type].
ACT Plus® Operator's Manual