Instrument Bottom; Optional Bar Code Scanner - Medtronic ACT Plus Manuel De L'utilisateur

6. Serial Port (RS-232)
7. Serial Port (USB)
8. Bar Code Scanner Port
9. Floppy Drive
1. Handle.
2. The Fuse Holder is located in the Power Inlet Module. See Section 9,
Maintenance, for fuse replacement.
3. The Main Power Switch is a rocker-type switch: "|" indicates ON and "O"
indicates OFF. It is located in the Power Inlet Module.
4. The Power Inlet Module is used to connect the power cord to the ACT Plus
instrument.
5. The Equal Potential Terminal is used to connect the ground of the ACT
®
Plus instrument to other instruments that may be used in a clinical setting.
6. The Serial Port (RS-232) is a female DB-9 connector (see Section 11,
Specifications, for details).
7. The USB Port is used to transfer and store patient and QC test information.
8. The Bar Code Scanner Port is the connection for the optional bar code
scanner (see Section 11, Specifications, for details).
9. The Floppy Drive is used to transfer and store patient and QC test
information.

Instrument Bottom

The Serial Number Label, which contains the serial number and safety agency
approvals, is located on the bottom of the ACT Plus

Optional Bar Code Scanner

See Appendix A, Optional Bar Code Scanner LS1900, and Appendix B, Optional
Bar Code Scanner LS2208, for additional information.
®
ACT Plus Operator's Manual
®
instrument.
®
English 23