1. The Clot Time Display is a red, seven-segment display of the clotting times
for Channels 1 and 2.
2. The Data Entry Display, an LCD screen, displays clotting times. It also is
used to select a test, enter data, and navigate through the screens (see
Section 6, Data Entry, for detailed instructions).
3. The Variable Function Keypad is used to select the desired field in the
various screen options.
4. The Quality Control Key is used to access the Quality Control Menu.
5. The Cancel Key is used to cancel any currently active function.
6. The Enter Key is used to accept entered numbers or data in an active field.
7. The Numeric Keypad is used to enter data into acceptable fields (ie, lot
numbers, user identification numbers [UIDs], and patient identification
numbers [PIDs]).
8. The Clear Key is used to clear the field.
9. The Stop Key is used to stop a test in progress.
10. The Main Menu Key is used to access the Main Menu.
Rear Panel
Figure 3 identifies the Rear Panel components.
6
7
8
9
1. Handle
2. Fuse Holder
3. Main Power Switch (ON/OFF)
4. Power Inlet Module
5. Equal Potential Terminal
22 English
Figure 3. Rear Panel Components
1
2
3
4
5
ACT Plus® Operator's Manual