Default Operating Parameters - Medtronic ACT Plus Manuel De L'utilisateur

Data Ports:
Serial data port:
USB port:
Bar code scanner port:
Floppy drive:

Default Operating Parameters

®
The ACT Plus instrument is shipped with the following default parameter settings:
Patient Parameters
Patient ID
User ID
Cartridge Lot Number
Cartridge Exp Date
Control Lot Number
Control Exp Date
Instrument Parameters
Date - yy-mm-dd
Time - hh:mm
Audio Tone
Language
Screen Contrast Adjustment
Output Location
Quality Control (QC) Manager Parameters
User Lockout
Permanent Record
QC Lockout
Liquid Interval
®
ACTtrac Interval
Cartridges Enabled
Location
Clear ID Interval
56 English
19200 baud, 8 data bits, 1 stop bit, no parity
Used with Medtronic approved USB storage device,
M930703A001.
Used with the optional Bar Code Scanner LS1900 or
LS 2208.
PC compatible, 1.44 MB, 3.5-inch floppy disk.
None
None
1111111111
11/11/11
1111111111
11/11/11
Preset by manufacturer
Preset by manufacturer
[ON]
Preset by manufacturer
Preset by manufacturer
[Floppy]
[OFF]
[None]
[OFF]
[None]
[None]
All
CVOR
[None]
ACT Plus® Operator's Manual