8 Configuration
The videocamera on analog models of the
product is configured via the OSM (8.1 OSM
interface (On Screen Menu), page 21). The
videocamera on IP models of the product
is configured via the web page (8.2 Web
interface, page 44).
8.1 OSM interface (On Screen
Menu)
This chapter applies to analog models of
the product.
8.1.1 Using the OSM
During normal operation of the unit, you can activate
the OSM to select and configure advanced functions.
For further information, refer to the manual of the
keyboard used and to the relative chapter. (8.2.2 User
Controls page, page 45).
Exit the OSM with Wide Zoom (Zoom-).
This is a dynamic self-configuration menu
based on the Pan & Tilt model.
MNVCUPKT_1838_EN
8.1.1.1 How to use the joystick
All operations in the menus are carried out using the
joystick.
Left
Fig. 28
Pan & tilt.
Exit
Fig. 29
Wide Zoom and Tele Zoom.
If you use control keyboards with 2-axes
joystick, use the Wide Zoom and Tele Zoom
buttons to Exit and Confirm.
Up
Right
Down
Confirm
21