Configuration; Default Ip Address; Web Interface; First Access To The Web - Videotec ULISSE EVO UE Manuel D'instructions

8 Configuration

8.1 Default IP address

The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compliant VMS or a network sniffer to
find the IP address of the device (IP scan utility).

8.2 Web interface

Browsers supported (the latest version):
Microsoft Edge, Google Chrome, Mozilla
Firefox.
8.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to address:
http://IP address.
On first access, the Home page will be displayed.
To configure the web interface, consult the manual
relating to the firmware version installed, available
on the product web page of the website www.
videotec.com.
MNVCEVO_2203_EN

9 Accessories and Supports

The complete list of accessories and
supports is available on the technical data
sheets of the product on the website:
www.videotec.com.
For further details on configuration and
use, refer to the manual of the relevant
accessory or support.
10 Instructions for normal
operation
Do not use the wiper if the ambient
temperature is under 0°C or if there is ice.
If it is left on, the wiper automatically
disables itself.
The device control can be performed through
different modes:
• Through the user's controls of the web interface (
8.2 Web interface, page 29).
• Through Video Management Software (VMS)
that supports the ONVIF protocol. In this case
the special controls are implemented using the
auxiliary commands of the ONVIF protocol.
• Through PTZ Assistant software (the PTZ Assistant
software is available to download on the product
web page of the website:
www.videotec.com).
29