Thermal Camera Menu - Videotec ULISSE RADICAL THERMAL Manuel D'instructions

8.1.13 Thermal Camera menu

1. Language: The menu allows you to select the
language.
2. State: Provides access to the sub-menu that
shows the technical information of the thermal
camera.
3. Spot Meter: Provides access to the measuring
point management sub-menu.
Video Setup: Provides access to the video
4.
configuration management sub-menu.
Configuration: Allows loading one of the
5.
default configurations of the camera or enabling
advanced configurations (Custom).
• Default: Sets the default configuration of the
thermal camera.
• Low Contrast: Sets the operation mode
designed for low contrast scenes (sea, sky...).
• Indoor: Sets the operation mode designed
for indoor environments.
• Outdoor: Sets the operation mode designed
for outdoor environments.
• Face Definition: Sets the operation mode
designed for face recognition.
• Custom: Allows manual configuration of the
thermal camera. Selecting this configuration
enables menus for advanced configurations.
THERMAL CAMERA
------------------------
1>LANGUAGE
2 STATE
3 MEASURING POINT
4 VIDEO SETUP
5 CONFIG.:
Fig. 64
MNVCUPKT_1838_EN
>
>
>
DEFAULT
To enable advanced settings select menu
item Custom.
Flat Field Correction: Provides access to the
6.
Flat Field Correction (FFC) and Gain Mode
configuration submenu.
7. Digital Data Enhancement: Provides access
to the Digital Data Enhancement (DDE)
configuration sub-menu.
Automatic Gain Correction: Provides access
8.
to the Automatic Gain Correction (AGC)
configuration sub-menu.
Isotherm: Provides access to the Isotherm mode
9.
configuration submenu.
THERMAL CAMERA
------------------------
1>LANGUAGE
2 STATE
3 MEASURING POINT
4 VIDEO SETUP
5 CONFIG.:
6 FLAT FIELD CORRECTION>
7 DIGITAL DATA ENHANC. >
8 AUTOM. GAIN CORRECT. >
9 ISOTHERM
Fig. 65
>
>
>
DEFAULT
>
35