Default Menu; Info Menu - Videotec ULISSE RADICAL THERMAL Manuel D'instructions

8.1.11 Default Menu

1. Delete Setup?: Resets all the parameters except
the Presets.
2. Delete Preset?: Deletes all previously stored
presets.
DEFAULT
------------------------
1>DELETE SETUP?
2 DELETE PRESET?
Fig. 62
The above mentioned operations cause the
loss of all previously stored data (i.g. Preset,
Patrol, Autopan, Home...).
34

8.1.12 Info Menu

The menu is used to check the configuration of the
device and the installed firmware version.
INFO
------------------------
Device ID: 00001
Type : Rs485 only Rx
Baud Rate: 38400-8N1
Protocol : MACRO
Net Board: Fw6.02 Hw01
Mpp Board: Fw6.02 Hw00
Config. : 001
P.C. : UPT1SVSA000E
S.N. : 000000000000
Upgrade : NET BOARD
Fig. 63
MNVCUPKT_1838_EN