Once Bright Agc Parameters Menu; Information Agc Parameters Menu; Isotherm Menu - Videotec ULISSE RADICAL THERMAL Manuel D'instructions

8.1.13.13 Once Bright AGC parameters menu

AGC mode settings: Once Bright.
It allows you to configure the following parameters:
1. Brightness Bias: Sets the brightness
compensation.
2. Contrast: Sets the image contrast level.
3. IIR filter: Sets the IIR filter coefficient. The filter is
used to define the speed with which AGC reacts
to variations in the scene.
PARAM. ONCE BRIGHT AGC.
------------------------
1 BRIGHTNESS BIAS:
2 CONTRAST
3 IIR FILTER
Fig. 79

8.1.13.14 Information AGC parameters menu

AGC mode settings: Information based and
Information-based equalization.
It allows you to configure the following parameters:
Info Threshold: Defines the difference between
1.
close pixels used to determine whether or not
the image contains information.
PARAM. AGC INFORMATION
------------------------
1 INFO THRESHOLD :
Fig. 80
MNVCUPKT_1838_EN
+0
: 32
: 0
0

8.1.13.15 Isotherm menu

Using the Isotherm menu it is possible to enable a
special colour for objects included within the set
temperature range.
It allows you to configure the following parameters:
Enable: Enables the Isotherm function.
1.
Mode: Selects the range display mode (in
2.
percentages or degrees Celsius).
Upper: Sets the upper limit of the Isotherm
3.
function.
Central: Sets the intermediate limit of the
4.
Isotherm function.
Lower: Sets the lower limit of the Isotherm
5.
function.
ISOTHERM
------------------------
1>ENABLES
2 MODE
3 UPPER :
4 CENTRAL
5 LOWER :
Fig. 81
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
: N
: PERCENT
95
: 92
90
43