Detaching The Rowing Belt; Re-Attaching The Rowing Belt - Tunturi Pure 8.1 Rower Mode D'emploi

Detaching the
rowing belt
Untie the bungee cord or cut the plastic
tiewrap holding the bungee at the
bungee attachment point. The bungee
attachment point is located at the bottom
of the main frame.
Pull the bungee cord through all three
pulleys and leave excess on top of the
tank for now.
To detach belt, simply pull beyond the
range of the normal rowing stroke until
the belt detaches from the belt bungee
pulley.
NOTE
You will hear the velcro separating just
before the belt detaches.
O w n e r ' s m a n u a l
Re-attaching the
rowing belt
• Begin re-attaching by guiding the
rower belt around the rower belt
pulley.
• The velcro side should be facing
upward as illustrated.
• Next, guide the belt around the idle
wheel as shown.
• Once around the idle wheel, attach
the rower belt to the belt / bungee
pulley. There is an obvious "lip" at the
attachment point.
•
P U R E R O W 8 . 1
GB
15