Welcome To The World Of Tunturi Exercising; Assembly; Supports - Tunturi E4 Mode D'emploi

Masquer les pouces Voir aussi pour E4:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
may damage the key membrane.
• Never lean on the interface.
• Never remove the side covers. Do not step on the
frame casing.
• Only one person may use the equipment at a
time.
• Hold the handlebar for support when getting on or
off the equipment.
• Wear appropriate clothing and shoes when
exercising.
• Protect the meter from sunlight and always dry the
surface of the meter if there are any drops of sweat
on it.
• The equipment must not be used by persons
weighing over 135 kg.
• Make sure the equipment is unplugged before car-
rying out any assembly or maintenance procedures.
• Do not attempt any servicing or adjustments other
than those described in this guide. Everything else
must be left to someone familiar with the mainte-
nance of electromechanical equipments and author-
ised under the laws of the country in question to
carry out maintenance and repair work.
• This product must be grounded. If it should mal-
function or breakdown, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed
and grounded in accordance with all local codes
and ordinances.
D ANGER:
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualifi ed electrician or serviceman if
you are in doubt as to whether the product is prop-
erly grounded. Do not modify the plug provided with
the product - if it will not fi t the outlet, have a proper
outlet installed by a qualifi ed electrician.
SAV E T H I S I N S T RU C T I O N M A N UA L
W E L C O M E T O T H E W O R L D
O F T U N T U R I E X E R C I S I N G !
Your choice shows that you really want to invest
in your well being and condition; it also shows
you really value high quality and style. With
Tunturi Fitness Equipment, you've chosen a high
quality, safe and motivating product as your
training partner. Whatever your goal in training,
we are certain this is the training equipment
to get you there. You'll fi nd information about
using your exercise equipment and what makes
for effi cient training at Tunturi's website at
W W W.T U N T U R I .C O M .
4
A S S E M B L Y
Start by unpacking the equipment and check that
you have the following parts:
Frame
1.
Rear support
2 .
Plastic covers for front support
3 .
Handlebar / meter
4 .
Transformer
5.
Assembly kit (contents marked with in the spare
6 .
part list): keep the assembly tools, as you may need
them e.g. for adjusting the equipment.
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no.
of the missing part. You'll fi nd a spare part list at
the back of this guide. The packaging includes a
silicate bag for absorbing moisture during storage
and transportation. Please dispose of the bag once
you have unpacked the equipment. The directions
left, right, front and back are defi ned as seen from
the exercising position.
S U PPOR TS
Place the rear support under the frame and fasten
it with two hex screws and washers. Tilt the cycle
back so that it rests on the rear support and seat.
Push the plastic covers into place at the ends of
the front support. Turn the cycle back to upright
position.
(2)

Publicité

Table des Matières
loading

Table des Matières