Publicité
Jp
■ The Lens Hood
En
The lens hoods protect the lens and block stray light that
would otherwise cause flare or ghosting.
De
Fr
Es
Sv
When attaching or removing the hood, hold it near the
symbol on its base and avoid gripping it too tightly.
Ru
Vignetting may occur if the hood is not correctly attached.
The hood can be reversed and mounted on the lens when not in
Nl
use. When the hood is reversed, it can be attached and removed
Pt
by rotating it while holding it near the lock mark (— ).
■ Built-in Flash Units
Pb
When using the built-in flash on cameras equipped with a
built-in flash unit, shoot at ranges of 0.6 m (2 ft) or more and
It
remove the lens hood to prevent vignetting (shadows created
where the end of the lens obscures the built-in flash).
Cz
Camera
Sk
D700 (DX format)
Ro
D7200/D7100/D100
Ua
D7000/D300 series/D200
Ck
D90/D80/D70 series
D5500/D5300/D5200/D3300 35 mm or more
Ch
D5100/D5000/D3100/
D3000/D60/D40 series
Kr
Id
For the latest information on vignetting with this lens, see the
camera manual.
20
28 mm or more
50 mm or more
50 mm or more
50 mm or more
50 mm or more
D50
50 mm or more
Align the lens hood lock mark (— )
with the lens hood mounting mark
(●) on the lens (e).
Focal length
18 mm
3.0 m (9 ft 11 in.) or more
28 mm
28 mm
1.0 m (3 ft 4 in.) or more
28 mm
2.5 m (8 ft 3 in.) or more
1.0 m (3 ft 4 in.) or more
1.0 m (3 ft 4 in.) or more
1.0 m (3 ft 4 in.) or more
28 mm
2.0 m (6 ft 7 in.) or more
1.0 m (3 ft 4 in.) or more
Use at ranges of
No restrictions
1.5 m (5 ft) or more
No restrictions
No restrictions
Publicité
Chapitres
