Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Limiting drilling stroke for drilling hole lines
To work more effectively, the drilling stroke can be shortened
for drilling hole lines.
For production, turn stop
using
1
lever
.
2
Interchangeable drilling unit
position. Hold down switch for initiating drilling stroke.
A short stroke is carried out for the next work cycle.
Danger!
Exercise care when the drilling unit moves up
and down, you could trap your fingers here.
Move stop
back after completing the work operation. The
1
lever is next to the drilling unit.
Note!
Check all settings once you have finished
making them.
must be in the lower
3
1
1
3
1
143
Publicité
Chapitres
Table des Matières
Dépannage
