Centre Stop; Bench Top Edge Distance - Hettich BlueMax Mini Modular Instructions De Service

Centre stop

Centre stop

is used for installing connecting fittings or
1
as the first stop for the hole line. Depending on working
direction, flip up the right or left-hand stop lever.
To adjust, undo knurled thumb screws ,
2
and position centre stop by hand.
Re-tighten knurled thumb screws after completing
adjustment.
2 1 2

8. Bench top edge distance

To set the bench top in relation to the interchangeable dril-
ling unit (spacing from edge), use the scale (manually) or
drum stops.
Undo screws with an Allen key and move bench in the
3 4
appropriate direction (forwards or backwards).
3 4
Setting by scale
5
The bench can be positioned at the required setting using
scale .
5
Re-tighten screws after completing this work.
5
145