Ec Declaration And Protocols; Ec Declaration Of Conformity - Hettich BlueMax Mini Modular Instructions De Service

EC declaration and protocols

2. EC declaration and protocols

1. EC Declaration of Conformity

2. Important note
3. Verification of instruction
100 100
1. EC Declaration of Conformity
under EC Machinery Directive 2006/42/EG dated 17 May
2006, Appendix IIA.
100
We hereby declare that in the version marketed by us the
101
machine designated below satisfies the fundamental health
and safety requirements defined in EC Directive 2006/42/EC
101
in terms of concept and design. This declaration shall become
null and void in the event of any change being made to the
machine that is not agreed with us.
Manufacturer:
Hettich FurnTech GmbH & Co. KG,
Gerhard-Lüking-Strasse 10, D-32602 Vlotho
Germany
Designation
Type
Machine no.
Year of manufacture
The following harmonised standards are applied:
• DIN EN ISO 12100:2011-03 Safety of machinery - General
principles for design - Risk assessment and risk reduction
(ISO 12100:2010); German version
EN ISO 12100:2010
• DIN EN ISO13857 Safety of machinery - Safety distances
to prevent hazard zones being reached by upper and lower
limbs (ISO 13857:2008); German version
EN ISO 13857:2008
• DIN EN 60204 Safety of machinery - Electrical equipment
of machines - Part 1: General requirements (IEC 60204-
1:2005, modified);
German version EN 60204-1:2006
• DIN 45635-1: 1984-04 in observation of Directive
2003/10/EG (noise) of the European Union
The analysis of risk was conducted in accordance with
DIN EN ISO 12100:2011-03.
The Technical Documentation is complete.
The operating manual belonging to the machine is available
in the original wording.
Person duly authorised for documentation: Mr. Simon
This declaration shall become null and void if changes are
made to the machine or parts of the machine that have not
been agreed in writing with the manufacturer.
BlueMax Mini Modular
Automatic drilling and insertion machine