Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical information
5. Technical information
1. Safety precautions
2. Attachment points
6. Noise mission
Transportation
13. Measures on temporary storage
14. Protection measures at the site of installation
15. Safety guards to be provided by the owner
16. Permissible ambient conditions
17. Removing preservatives
114
114
1 Safety precautions
Observe the regulations, warnings and provisions on health,
safety and environmental protection for all of the work
114
described in this section.
114
2. Attachment points
115
Only use suitable and approved lifting gear (crane) for
unloading the machine, assemblies and components as well
116
as for lifting heavy loads; only use appropriate means of
117
transport for handling the machine internally.
118
Any unloading or internal handling must not be done by hand
if such involves weights in excess of 25 kg.
118
When using industrial trucks to unload the machine and move
118
it internally, always take into account the machine's total
118
permissible weight (see Technical specifications).
118
118
Danger!
118
Never stand or work under loads suspended on lifting
gear. This presents the risk of fatal injury!
118
119
Observe the following when using lifting gear:
119
• Only attach lifting gear at the points marked (lifting
eyebolts etc.) on the machine / assemblies / components.
119
• Only use appropriate and tested load suspension devices
119
(lifting belts, ropes, chains, shackles etc.) with a sufficient
load carrying capacity.
119
• Only give experienced, skilled personnel the task of
120
attaching the machine / assemblies / components.
120
• Always ensure level standing for machine / assemblies, lift
120
vertically, never drag at an angle.
120
Protect projecting machine parts and equipment from
damage when using lifting gear and moving the machine
120
internally.
Set down loads gently with the usual care and take
immediate action to prevent them from falling over /
tipping, rolling away, suffering damage from external force,
e.g. colliding with industrial trucks and objects falling from
above.
Publicité
Chapitres
Table des Matières
Dépannage
