Drum Stops - Hettich BlueMax Mini Modular Instructions De Service

Drum stops

!
Before you start installing, make sure you disconnect the machine from the power supply and depressurise it!
i
Left-hand drum stop
The drum stops leave the factory screwed directly to the base profile.
When using continuation stops, the drum stops must be unscrewed
and screwed to the left and right outer side of the continuation stops.
Make sure the rear edge of continuation stop and drum stop are flush
with the rear edge of the base profile. The threaded stud provided is
used for adjusting the setting in exactly the way required.
i
left
Left-hand continuation stop Left / right-hand base
Machine rear
Right-hand continuation
profile stop
Right-hand drum stop
right
187