Hold-Down Clamp - Hettich BlueMax Mini Modular Instructions De Service

Start-up / trial run

Hold-down clamp

The hold-down clamps (assembly) are pre-mounted.
2
This only needs installing on machine
no. 9 131 498 and 9 131 499.
Photograph shows the right-hand side of the hold-down
clamp, the hold-down clamp for the left-hand side is
installed the other way round.
Attaching the hold-down clamp.
First tighten bolt .
1
Now fix the pre-mounted hold-down clamp in place
using tommy screw
.
2
1
Fit hose into
2
3 2
clamp-type mount on pressure cylinder.
3
Always follow the assembly instructions!
130