Changing Interchangeable Drilling Units; Cleaning - Hettich BlueMax Mini Modular Instructions De Service

6. Changing interchangeable drilling units

Depending on application, the appropriate interchangeable
drilling unit must be fitted for drilling the required holes.
We will now show you how to change a drilling unit on
the basis of this example. When changing drilling units,
we recommend wearing safety gloves to prevent injuring
yourself on the sharp tools.
Warning!
When changing tools, always detach the
compressed-air hose and disconnect from the
power supply (unplug mains plug).
First undo star-shaped handles
tool slips down.
U-shaped safety element holds back interchangeable
2
drilling unit to prevent it from dropping down.
3
Lower interchangeable drilling unit out of guide using grip
, while giving safety element
4
Set the interchangeable drilling unit aside.

Cleaning

Before fitting the interchangeable drilling unit you require,
clean mating faces and drive sprocket
5
cloth.
Note!
Soiling results in rapid drive-component wear and
leads to malfunctions in the production process.
until
1
a short downward turn.
2
with a clean
6
1
2
4
2
4
5
6
1 3
139