General; Area Of Application; Description Of System - Kessel InnoClean PLUS Instructions De Montage

2.1 Area of application

InnoClean PLUS, the septic system from KESSEL, is a clea-
ning unit for domestic wastewater in keeping with DIN 4261
Part II / EN 12566. It is not envisaged for precipitation and
animal husbandry and swimming pool wastewater. This
septic system biologically cleans domestic wastewater and
automatically adapts to the quantities arising. The waste-
water is collected and cleaned in a plastic tank.
This tank is envisaged for trench shoring in the ground. A
control unit automatically regulates aeration and agitation.
It is envisaged for unobstructed installation in frost-protected,

2.2 Description of system

KESSEL-InnoClean PLUS consists of two main segments.
The control unit is located inside a frost-free, flood-proof
and dry room. The plastic tank inside of which the purifica-
tion process is taking place is installed in the ground outside
the building.

2. General

dry rooms which are safeguarded from flooding. In addition
to the septic system, provision must be made for a suitable
wastewater discharge line in keeping with ATVDVWK
AA138. Furthermore, the council, country district or district
water authority is responsible for installation and operation
approval.
Control unit (control and compressor)
Inlet
Preliminary sedimentation chamber
Aeration chamber
Aerator spark plug
Seepage pit (optional)
Valve block
Purification tower with integrated sampling
vessel and drain
Cable conduit
Ventilation line
96