Notes On This Manual; Safety; General Safety Notes; Personnel Qualification - Kessel Pumpfix S Instructions De Pose Et D'utilisation

1

Notes on this manual

The following conventions make it easier to navigate the
manual:
Symbol
[1]
(5) Position number 5 from the adjacent figure
...
Check whether
manual control
has been acti-
vated.
Press OK.
✓ System is ready
for operation.
see "Safety",
page 17
Bold type
Variants or additional information (e.g.
Italics
applicable only for ATEX variants)
Technical information or instructions
which must be paid particular attention.
016-168
Explanation
See Figure 1
Action step in figure
Prerequisite for action
Action step
Result of action
Cross-reference to Chapter 2
Particularly important or
safety-relevant information
Installation and operating manual
2

Safety

2.1

General safety notes

NOTICE
Disconnect system from energy sources!
Ensure that the electrical components are discon-
nected from the electrical power supply during
the work.
WARNING
Live parts
Heed the following points when working on electrical
cables and connections.
The national regulations concerning electrical
safety apply to all connections and installation
work.
The system must be supplied through a residual
current protection device (RCD) with residual cur-
rent of not more than 30mA.
2.2 Personnel - qualification
In order to guarantee the long-term safety of the system,
only the following activities may be performed, in accordance
with the qualification of the person carrying out the activity.
17 / 92