General Notes - Kessel 400 Instructions De Pose Et D'utilisation

3 Installation
3.1

General notes

The stability of the tank is only ensured for its self-weight,
transport and the described installation, in accordance with
the intended use (e.g. load class, road construction). Addi-
tional loads from single strip footings, or other external
actions must be avoided. If such actions are to be expected,
it may be necessary to take special measures.
Vertical height adjustment
by 125/350 mm (without
sawing off).
If the final covering subse-
quently settles, the upper
section also lowers due to
its flexible, tight connec-
tion.
010-050
The upper section can be
rotated - to adjust to the
tiling pattern.
Flexible level equalisation
(up to 5°) between upper
section and drain body.
Sealing is ensured by lip
seal.
Installation and operating instructions 19 / 80