FUEL JOINT, FUEL FILTER AND FUEL PUMP
CHECKING THE FUEL JOINT
1. Check:
Fuel joint
Cracks/leak/clog/damage
2. Check:
Fuel joint operation
Impossible to maintain the specified
pressure for 10 sec.
NOTE:
Do not overpressurize the fuel joint.
Excessive pressure may cause air to leak
out.
Checking steps:
(1)Attach the mity vac.
Mity vac:
YB-3956-A/90890-06756
(2)Apply the specified pressure.
Specified pressure:
50 kpa (0.5 kgf/cm
CHECKING THE FUEL FILTER
Check:
Fuel filter
Cracks/leak/clog
INSTALLING THE FUEL FILTER
Install:
Fuel filter
NOTE:
Install the fuel filter with arrow mark facing
towards the fuel pump.
4-2
Replace.
Replace.
2
, 7.1 psi)
Replace.