Stopping The Engine - Ammann APR 2220 Traduction Du Mode D'emploi Original

3. Op er a tion
3.5.2 If the en gine starts
•
Set the en gine speed le ver (1) to idle (MIN).
•
Al low the en gine to run for 1-2 min utes in or der to warm up.
•
If the choke le ver (3) has been moved to the «CLOSED» po si -
tion to start the en gine, grad u ally move it to the «OPEN» po si -
tion as the en gine warms up.
3.5.3 Stop ping the en gine
•
Set the en gine speed le ver (1) to the «MIN» po si tion.
•
Turn the en gine switch (4) to the «OFF» po si tion.
62