Operation The Engine; Starting The Engine; Switching Off The Engine - Ammann APF 1033 Mode D'emploi

Honda gx100
Masquer les pouces Voir aussi pour APF 1033:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.3 Operation the engine

3.3.1 Starting the engine

OFF
Honda GX 100_14
Turn the fuel valve (1) to «ON».
2
OPEN
Honda GX 100_03
Push the choke lever (2) to «CLOSE».
Honda GX 100_04
Set throttle lever (3) to full throttle.
1
ON
CLOSE
CLOSE
min
max
3
OFF
ON
Honda GX 100_05
Set the engine switch (4) to «ON».
5
Honda GX 100_06
Pull the starter handle (5) slightly until resistance is notice-
able, then pull firmly.
Do not allow the starter handle (5) to spring back
against the engine. Move the starting cable back
into its initial position manually to prevent the
Attention
starter being damaged.
Do not use the choke when the engine is warm or
at high outside tempertures.
After the engine has started:
min
Set the throtte lever to idling.
Allow the engine to warm up for 1 to 2 minutes.
Set the choke lever (2) during the warming up phase to
«OPEN».

3.3.2 Switching off the engine

Set the throttle lever (3) to «min.».
max
Turn the engine switch (4) to «OFF».
Set the fuel valve (1) to «OFF».
In case of emergencies, the engine switch should be
turned to «OFF» to switch off the engine.
Important
25
3. Operation
OFF
ON
4

Publicité

Table des Matières
loading

Table des Matières