Operation Position; Overall Dimensions - Mondolfo Ferro AS 914 TI Manuel D'utilisation

5.1 OPERATOR POsITION
Figure 9 shows the operator's positions during
the various work phases:
A Bead breaking
B Tyre demounting and mounting
C Inflation area.
In these conditions, the operator can carry out, monitor and check the outcome of all
tyre change operations and take action in the case of any unforeseen events.
RIsk OF CRUsh INJURY. Column tilting must be performed from work position B
(fig.9), keeping the hands away from moving machine parts.
6. oveRAll DIMenSIonS (mm)
Max. lenght A = 49"
Max. width B = 42"
Max. height H = 78"
24
NOTICE
WARNING
h
B
A
C
A
10
AS 914 TI User Manual
B
9