Inflating Tyres - Mondolfo Ferro AS 914 TI Manuel D'utilisation

3. Never exceed the bead setting pressure (gauge on hose)
provided by the tyre manufacturer, as stated on the sidewall
of the tyre.
4. Never place your head or any part of your body over a tyre
during the inflation process or when attempting to seat beads.
This machine is not intended to be a restraining device for
exploding tyres, tubes or rims.
5. Always stand back from the tyre changer when inflating,
never lean over.
During this operation, noise levels assessed at 85 dB(A) may occur.
Wear hearing protection devices.
ExPLOsION hAZARD. An exploding tyre and rim may be propelled upward and
outward with enough force to cause serious injury or death.
Do not mount any tyre unless the tyre size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tyre are defective or damaged.
This tyre changer is not a safety device and will not restrain exploding tyres and rims.
keep the area clear of bystanders.
9.7.b. INFLATINg TYREs
- Release the wheel from the sliding
clamps on the table top (Fig. 28).
- Bring the horizontal arm in its work
position (Fig. 29).
- Lower the vertical rod until it touch-
es the rim
(Fig. 30).
AS 914 TI User Manual
WARNING
DANGER
YES
29
NO
28
30
37