Troubleshooting - Mondolfo Ferro AS 914 TI Manuel D'utilisation

Only activate the air inflation jets if the rim securing device is locked in place and
the tire is properly clamped.
EsPLOsION hAZARD. Never mount a tire to a rim that is not the same diameter
(e.g., 16 1/2 inch tire mounting on a 16 inch rim).
If the tyre is over-inflated, air may be removed from the tyre by pressing the brass manual
air release button located below the air pressure gauge.
Disconnect the inflation hose from the valve stem.

10. TRoUbleSHooTInG

PROBLEM
When you depress the table
top rotate pedal, the fuses
blow.
Table top rotate pedal does
not return to its home
(centre) position.
Bead breaker and table top
rotate pedals do not return
to their home positions.
Air leak inside the machine
(open the pedal unit panel
and check exactly where
the air is coming from).
Bead breaker cylinder
has little force. It does
not break the bead and
leaks air.
Bead breaking cylinder
leaks air at pin.
AS 914 TI User Manual
WARNING
WARNING
LIkELY CAUsEs
❏ Power cord shorted.
❏ Motor shorted.
❏ Control spring broken.
❏ Pedal return spring bro-
ken
❏ Grease nipple empty.
❏ Air leak in bead breaker
cock.
❏ Air leak in table top cock.
❏ Silencer plugged.
❏ Cylinder gaskets worn.
❏ Seals worn.
REMEDIEs
❏ Check wires.
❏ Change fuses
❏ Change motor.
❏ Change control spring.
❏ Change pedal return
spring.
❏ Top up grease nipple with
SAE 20 non detergent oil.
❏ Change cock.
❏ Change bead breaker
cylinder.
❏ Change table top cylinder.
❏ Change swivel connector.
❏ Change gaskets.
❏ Change bead breaker
cylinder.
❏ Change silencer.
❏ Change gaskets.
❏ Change bead breaker
cylinder.
41