Assembly Of Fitting Holder (Optional); Assembly Of Strew Brush (Optional) - probst LEVELFIX LF Instructions D'emploi

Adjustments
3.7

Assembly of Fitting Holder (optional)

1. Remove the nuts (9) from the fitting holder.
2. Take out the bracket of the fitting holder.
3. Place the fitting holder on the tube of the handle.
9
3.8

Assembly of Strew Brush (optional)

1. Loosen the clamp screw (10).
2. Plug in the strew brush.
10
4. Mount the nuts (9).
5. Adjust the desired height
6. Tighten the nuts (9).
3. Tighten the clamp screw (10).
14 / 18