General
1
General
1.1
Authorized use
This device is universally suitable for precise preparation of laying courses and spreading of the bedding material, for
example gravel, crushed stone, sand, soil etc. on small- and middle-size areas. From a standing start a clean laying course
can be created easy and precisely.
The device is only suitable for manual use.
The device consists of following parts:
Handle: Adjustable in the angle, can be removed and attached in parking position when the device is not in use.
Wheels: The two wheels which are located on the operator's side are height adjustalbe and can be removed.
Screeding bar: Two units, length depends on device variant. Roof profile can be set infinitly variable. Sharpen
blade on the lower edge allowing to peel the material when working with stabilized sand.
Roll unit: One or two units, depending on the device variant. The box can be weightened with stones, so while
spreading the material, more material can be moved at once.
1.2
Accessories (optional)
Fitting Holder LF-ZH
Order no: 4100.0318
Strew Brush LF-EB
Order no: 4100.0319
3 / 18