Adjustments; Attaching The Handle; Turn The Hanldle From Parking Position Into Working Position - probst LEVELFIX LF Instructions D'emploi

Adjustments

3 Adjustments
3.1

Attaching the handle

3.1.1

Turn the hanldle from parking position into working position

1. Pull the handle out of the holder.
3. Remove the wing screws (2) and the wing nuts (3).
2. Tighten the wing screw (1) if necessary.
4. Apply the handle into the handle guiding, plug in
the wing screws (2) and attach the handle with wing
nuts (3). Choose the rear holes (see red marking)
depending on the desired tilt of the handle.
2
3
1
7 / 18