Publicité
8.3.4.
Inserting & removing USB flash drives
8.3.5.
"Data transfer" indicator
Display
Description
The "data transfer" indicator flashes when information is being written to the USB flash
drive.
8.3.6.
Real-Time clock function
• This data logger module incorporates an accurate battery-backed real-time clock to display the date and time
of day.
• It compensates for leap years.
• It does not automatically compensate for daylight saving in summer and winter.
• With the real-time clock function, measured value data and files can be provided with a date and time stamp.
• Note:
The date and time stamp of the file is the time the file was last written (not the time when the file was first
created).
• The internal battery has a service life of approximately 10 years.
• See the section on setting the date and time.
8.3.7.
Notes on data logging
• Data logging commences when a firing is started.
• It finishes when the firing is complete and when the kiln has cooled to 100°C.
• The "LOGxyz.CSV" file is generated on the USB flash drive.
• The first file created will be "LOG000.CSV".
• Subsequent firing processes will generate files "LOG001.CSV" to "LOG999.CSV".
• 1000 log files in total can be generated on the USB flash drive.
• It is recommended that you move the log files to another storage medium after a few firing processes.
• It takes about 1 second for the individual files on the stick to be indexed. Only then can a new file be created.
• So, for example, if there are files LOG000.CSV to LOG100.CSV on the USB flash drive, there would be a
delay of just over 100 seconds before LOG101.CSV could be created and logging could be commenced.
• The files are generated in CSV file format and ASCII code and can be imported directly into Microsoft Excel
tables.
⇒
The USB port (1) for inserting the USB flash drive is located
on the top of the housing, under an easily removable cover
(2).
⇒
Keep the USB port cover safe or reinsert it when not using
the port.
⇒
The USB flash drive may only be plugged into the controller
or removed when no data is being written to it.
⇒
The controller does not have to be switched off to insert and
remove a USB flash drive; however, this is recommended.
⇒
The "USB flash drive plugged into USB port" indicator (3) on
the top of the housing goes out as soon as the flash drive is
removed.
76 / 384 - EN -
Publicité
