Publicité
5.1.2.
Keylock
Step
Action
Unlocking the keys
1
If any key is pressed and "LOC" appears in the display, the keys are locked.
d
Press the
2
the main display to unlock.
Locking the keys
d
Press the
1
main display to lock.
2
If any key is pressed and "LOC" appears in the display, the keys are locked.
5.1.3.
Quick start guide
Step
Action
Switching on the controller
Switch on the unit by pressing the selector switch on the bottom and wait for the kiln temperature
1
to be displayed.
Calling up & starting or ending the firing program
2
Check the set program values before each program start.
3
Call up the firing programs with the
f
4
Use the
5
Start the selected firing program with the
6
End the firing process by pressing the
Changing the firing program
7
Call up the firing programs again with the
8
You can call up the firing data again with the
9
You can change the firing data with the
g
10
Press the
11
You can switch back to the previous value with the
j
With the
12
entered changes are automatically saved.
f
and
keys and hold for 5 seconds until "ULOC" appears on
f
and
keys and hold for 5 seconds until "LOC" appears on the
X
d
or
keys to select the firing program.
key to move on to the next firing value.
key, you can exit programming mode and start the firing process immediately; all
key.
j
key. The indicator lamp above the
j
key again. The indicator light above the
X
key.
g
key.
f
d
or
keys.
h
key.
54 / 384 - EN -
Display screen
LOC
ULOC
LOC
LOC
j
key lights up.
j
key goes out.
Publicité
