Publicité
5.4.
Programming the control unit
5.4.1.
Changing the firing program
No.
Display
Indicator
20
0
Pr. 1
1
Pr. 2
2
20
3
4
20
5
00.00
6
Meaning
No program in operation
Select program memory
Select program number
Firing chamber
temperature
Go back some steps
Continue programming
Enter program delay t
0
60 / 384 - EN -
Description
•
If no firing is being performed, no indicators
will light up.
•
The main display shows the current firing
chamber temperature.
X
Press the
key to select the program memory
for the firing programs.
d
f
•
Press the
and
desired program number.
g
•
Press the
key to select the program
number to be changed.
First, the current firing chamber temperature is
displayed.
h
•
Press the
key to go back one step to the
previous value.
•
To select a new program number from the
program memory, press the
back to "Firing chamber temperature (No. 3)"
X
and then press the
program memory.
•
To further customise the programming,
proceed to step #5.
g
Press the
key to select the next program
step.
d
f
•
Press the
and
program delay.
•
For technical reasons, there is a point
between the hours and minutes in the
display and not a colon, as is usually the
case with times.
•
If you do not enter a program delay or if the
"
00.00
display shows
starts immediately after you have pressed
j
the
key.
•
You can enter program delays up to
"
(h.min)
.
g
•
Press the
key to select the next program
step.
keys to select the
h
key to go
key to return to the
keys to select the
"
, the firing program
99.59
"
Publicité
