Publicité
Step
Display
07.45
13
08.55
14
22
15
22
16
22
17
g
5.1.5.
The
INFO key
General description:
g
The
INFO key can be pressed at any time to obtain additional information. It does not matter whether the
controller is executing a program or not.
Notes:
⇒ If no key is pressed after pressing the
kiln temperature) after 10 seconds.
⇒ The INFO display can be terminated immediately by pressing the
Operation:
g
The
INFO key
Key pressed 1x
Key pressed 2x
Key pressed 3x
Key pressed 4x
Description
h
g
Use the
or
key to select the
flashing number.
d
f
Use the
and
keys to change the
flashing number.
Change from hour to minute and from
minute to second with the
The last numerical value for the second of
the current time is alone on the main
display after switching on.
You can now either save the date and
time settings with the
approximately 15 seconds. The control
system display will then go dark for 2–3
seconds, and the control system will
restart automatically. After the restart, the
control system is ready for normal
operation again.
g
INFO key, the INFO display returns to the normal display (current
Description
The maximum temperature of the current program is displayed.
The energy consumed in kWh is displayed; for this, parameter P14 must be set and
entered correctly.
The current setpoint of the control is displayed.
The controller returns to the initial display and shows the current temperature again.
Remark
g
key.
g
key or wait
The date and time are automatically
saved with the last setting after a
restart.
g
56 / 384 - EN -
f
d
,
or
keys.
Publicité
