Publicité
=» continued
To connect other equipment
with
an AU BUS jack
rear panel of the tuner
AU BUS
Other Sony
oe
You can connect other Sony equipment
with the AU BUS to the AU BUS jack.
You can use Automatic Source Selection,
Synchronized Recording and Timer
Recording with the connected equipment.
However, these features may not be
provided on some models.
Connecting Audio
Optional Equipment
You can connect the following optional
28
speakers lo the stereo. For details. refer to
the instruction of each speaker.
erear speakers (Sony SS-J90AV) to the
REAR SPEAKER jacks
ecenter speaker (Sony SS-CN3, etc.) to the
CENTER SPEAKER OUT jack
esuper woofer (Sony SA-W90} to the
SUPER WOOFER OUT jack
rear panel of the preamplifier
To cormect
a microphone or
headphones
You can connect the microphone (mini jack)
to the MIX MIC jack on the front panel of
the
ifier.
You can connect the headphones (stereo
tminijack) to the HEADPHONES jack on the
front panel of the preamplifier.
front panel of the preamplifier
HEADPHONES
Connecting a VCR or a TV
rear panel of the preamplifier
MONITOR OUT
4% Connect the LINE IN jacks of the VCR
or the TV to the VIDEO 1 OUT,
VIDEO 2 OUT or MD/DAT OUT jacks
on the eat panel of the preamplifier
with audio/video connecting cable.
Connect the LINE OUT jacks of the
VCR or the TV to the VIDEO 1 IN,
VIDEO 2 IN or MD/DAT IN jacks on
the rear panel of the ——
witk
audio/video connecting cable.
Make sure you connect the plugs to
jacks of the same color.
2 Press VIDEO 1, VIDEO 2 or MD/DAT
{or press VIDEO FUNCTION on the
retnote commander until the VIDEO
indication lights).
The connected sound and visual source
comes through the speakers
and the TV
connected to the MONITOR OUT jack.
You can also record the VCR or the TV
sound.
To contro! a VCR or TV with the
supplied
remote commander
The remote commander provided with thus
unit is equipped with TV and video
operation buttons, and can be used to
control the basic functions
of Sony
television
sets and video decks.
Mixing audio/video
sources
You can watch a TV o¢ video tape while
playing a CD or other such audio
equipment
as background music.
in other words, you can use the
FUNCTION buttons to select the
audio/visual sources.
For details, refer to the mstructions
of your
VCR.
1 Press one of the FUNCTION buttons (or
VIDEO FUNCTION on the remote
corrunander) to select the video that you
want to watch or edit. The red indicator
lights.
2 Press one of the FUNCTION buttons (or
AUDIO FUNCTION on the remote
commandes) to select the audio. The
video equipment that you selected
previously remains selected (but the
indicator changes to green), only the
audio is changed. (The corresponding,
red indicator hghts.)
3 Start playback on each of the selected
units
You can also record the selected audio and
video together by using other VCR. For
details on how to record the mixed audio
and video, cefer to their instructions
of each
equipment.
Publicité
