Publicité
Chapter 3:
the
—XXVC
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
ae
eee
eee
Listening to the
Radio
When you want to play a radio program,
you can have the tuner automatically
scan
the radio frequencies
and tune in the
stations with clear signals. This feature
saves you time in searching for stations
with clear signals. However, stations with
weak signals may be skipped by automatic
tuning. Manually tune in the ones skipped
by automatic tung.
FH
88. COMHZ
ai you don't want to listen to the station
selected, tun CONTROLLER to restart
the scan.
When the desired station is not
tuned in
Automatic
tuning may skip the station with
weak signal. Tune in the station manually.
4 Press TUNING MODE so that only
TUNING
is lit.
2 Turn CONTROLLER
to the - oc + side
unt the desired station is tuned in
To improve
AM broadcast
reception
Reorient the supphed AM loop antenna for
AM.
AM
To change the AM tuning interval
The AM
interval
is preset to 10 kHz
in the factory. If you need to change the
mterval,
do as follows:
4 Tum on the power.
2 Change
the band to AM.
3 Tum off the power.
4 Tum the power back on while pressing
MEMORY.
After changing the AM tuning interval,
teset the
tadio stations.
To reset the
interval to the factory setting, follow the
same procedure.
When an FR program is not dear to receive
Press STEREO/MONO 140 that "MONO"
appears in the display. There will be no
stereo effect. but the reception will improve.
Press STEREO/MONO
again to restore the
stereo effect.
———————
Presetting Radio
Stations
You can store radio frequencies
in the
tuner's memory to tune in your favorite
stations quickly. You can preset up to
20 FM stations and 10 AM stations in any
order.
Use the buttons on the unit for presetting
stations.
Publicité
