Télécharger Imprimer la page

Haojue DL160 2023 Manuel D'utilisation page 90

Publicité

(90)
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
comes on when the LIGHT or BLINK mode is selected.
7. Push the SEL button 9 to fix the selected mode.
Change to preset rpm selection when you select the
LIGHT mode or BLINK mode.
8. While in the mode selection, if the motorcycle reaches
speed of more than 10 km/h or the ignition switch
is turned to "%" position, the mode selection is
cancelled.
Preset rpm selection
1. Select the LIGHT mode or BLINK mode.
2. Push the ADJ button 8 to select a preset rpm. Push
the ADJ button 8 to change the preset rpm from 4000
r/min to 10500 r/min in steps of 500 r/min.
3. Push the SEL button 9 to fix the selected setting.
BWARNING
Changing
the
display
EN
hazardous. Removing a hand from the handlebars
can reduce your ability to control the motorcycle.
Never change the display while riding. Keep both
hands on the handlebars.
ADJ BUTTON 8
The ADJ button 8 is used to adjust the dashboard, see
related content in the dashboard section.
SEL BUTTON 9
The SEL button 9 is used to adjust the dashboard, see
related content in the dashboard section.
(90)
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
while
riding
can
be
SPEEDOMETER
The speedometer indicates the road speed in kilometers
per hour.
Unit switching function:
Press and hold the ADJ button 8 and turn on the ignition
switch. Hold the ADJ button 8 for 4 seconds to switch
between km/h and mph. At the same time, the odometer
will be changed between km and mile.
NOTE: Select km/h or mph, as appropriate, to comply with
traffic regulations.
NOTE: Check the km/h and mph display after adjusting
the instrument panel display.
TACHOMETER
The tachometer displays the engine's revs, indicating its
revolutions per minute.
BCAUTION
Even if the engine break-in has been completed,
the tachometer must not enter into the red area.
The red area indicates that the engine has entered
in its rotational speed limit. Riding the motorcycle
in this area could break the engine down.
TOTAL METER AND TRIP METER
The TOTAL meter registers the total distance that the
motorcycle has been ridden. TOTAL meter ranges from
0 to 999999.
The TRIP meter is mainly used to calculate distance of
16

Publicité

loading