Publicité
BCAUTION
Keep the engine in good running condition,
regular maintenance and check.
engine combustion, resulting in excessive exhaust
temperature and damage to the catalyst.
BCAUTION
When installing the muffler, install the muffler
gasket correctly.
BCAUTION
If you need to disassemble and install the oxygen
sensor, you must go to the distribution and
maintenance organization to deal with it, and you
must wait for the muffler and oxygen sensor to cool
down to normal temperature before disassembling
and assembling.
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
MAINTENANCE OF ABSORBER
The absorber is an important performance part. Regular
and standardized maintenance can effectively extend the
Avoid poor
service life of the absorber and ensure the safety and
comfort of the motorcycle.
It is forbidden to touch the surface of the tube of
the front absorber with sharp and hard objects to
avoid damage to the surface of the tube and cause
oil leakage.
Clean the dry mud and silt adhering to the surface
of the front tube and the surface of the dust cover in
time to avoid damaging the dust cover and oil seal
and causing oil leakage. In bad road conditions, it
is recommended to check and clean up in time after
each trip.
It is forbidden for foreign objects such as plastic
film, plastic tape, adhesive paper to adhere to the
surface of the front tube.
will be drawn into the oil seal along with the
reciprocating movement of the absorber and cause
oil leakage.
9
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
BCAUTION
BCAUTION
BCAUTION
The foreign objects
(83)
EN
(83)
Publicité
