Publicité
a short ride, or for fuel consumption calculation. There
are two TRIP meters
TRIP A
ranges from 0 to 999.9.
You may shift the TOTAL and the TRIP meters with SEL
button 9: TOTAL →
TRIP A
to TRIP meter display mode, and press the SEL button 9
for more than 2 seconds, TRIP meter goes to the zero.
NOTE: When display TOTAL meter, character string
"TOTAL" should be displayed; when display TRIP meter,
character string "TRIP" should be displayed.
NOTE: After the TRIP meter reach to the maximum value,
reset the value to zero automatically, then continue work.
OIL CHANGE INDICATOR
When the motorcycle drives to a set mileage, the oil
change indicator will automatically light up, reminding you
of changing the oil, so that you don't always have to
remember when the last replacement of oil was, to prevent
insufficiency, drying out or serious deterioration of oil, thus
causing damage to your motorcycle's engine. Therefore,
changing your engine oil on a regular basis is very useful.
First light-up:
To ensure that you change your oil for the first time on
timely, the oil change indicator will light up for the first time
when the meter reaches the total mileage of 1000 km.
NOTE: You must turn off the oil change indicator
according to the "Turn-off Operation" after changing the
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
and
TRIP B
. TRIP meter
→
→ TOTAL. Shift
TRIP B
OIL CHANGE
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
oil.
Turn-off operation:
After pressing the ADJ button 8 and SEL button 9 for 2
seconds, a "3000" is displayed by flashing in the position
of the LCD screen showing the total mileage.
the ADJ button 8 or SEL button 9 to switch settings
(minimum "500", interval "500", maximum "12,000"), and
then press the ADJ button 8 and SEL button 9 for 2
seconds at the same time. The oil change indicator will
flash 2 times before turning off.
Turn-off thereafter:
If the total mileage is 1200 km, do the "Turn-off Operation"
when the LCD screen displays "2000" by flashing, then the
oil change indicator will automatically light up when your
motorcycle has a total mileage of 1200+2000; that is, the
total motorcycle mileage is 3200 km.
NOTE: After that, you must turn off the oil change indicator
according to "Turn-off Operation" after changing the oil.
POSITION INDICATOR
The position indicator will light up when the position lamp
is turned on.
ENGINE RPM INDICATOR MARK
Refer to the ENGINE RPM INDICATOR 7 section.
GEAR INDICATOR
The indicator on the dashboard panel indicates the current
gear the motorcycle is in. There are gear 1, 2, 3, 4 and 5.
When shifting gears, these indicators will light up. When
shifted to the neutral position, the indicator (green) "N" will
17
(91)
Press
6
?
(91)
EN
Publicité
