Publicité
":" position
The headlamp high beam and the high beam indicator on
the dashboard will light up at the same time for overtaking.
TURNING SIGNAL SWITCH 3 = 8
Moving the switch to the "=" position will engage the
left turn signals. Moving the switch to the "8" position
will engage the right turn signals. The indicator on the
dashboard will also flash. To cancel turn signal operation,
push the switch inward.
BWARNING
Failure to use and failure to turn off the turn signals
can be hazardous. Other drivers may misjudge
your course and this may result in an accident.
Always use the turn signals when you intend to
change lanes or make a turn. Be sure to turn off
the turn signals after completing the turn or lane
change.
HORN BUTTON 4 ,
Pressing this button will trigger the horn.
HAZARD WARNING SWITCH 5 >
ON
OFF
All four turn signal lamps and indicators will flash
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
simultaneously when the switch is turned ON with the
ignition switch in the "*" position. Use the hazard warning
lamps to warn other traffic during emergency parking or
when your motorcycle is involved in a traffic hazard.
OUTPUT TERMINAL
Next to the left handle switches, the motorcycle is
equipped with a output terminal with a rated voltage of
5V, and the terminal is covered with a plastic cover. When
the engine is running, the terminal can provide a power
output with a maximum power of 10W. When using this
power interface, first check whether the rated voltage
and maximum power of the electrical appliance meet the
requirements of a rated voltage of 5V and a maximum
power of 10W.
19
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
(93)
EN
(93)
Publicité
