Publicité
BWARNING
An excessively loose chain will result in the chain
coming off the sprocket, resulting in an accident
or seriously damage to the engine. Please adjust
the drive chain in accordance with the methods
described below.
1. Support the motorcycle with the main stand.
2. Loosen the rear axle nut 3.
3. Loosen the lock nut 1 on the adjuster 4.
4. Move the adjuster 4 to front or rear to make the chain
slack for 20–30 mm. Make the front and rear chain
wheels on a single straight line by making sure of the
left-right consistency of the sign positions 2 of the
rear wheel fork 5 and the left and right adjusters 4.
5. After adjusting the tightness of the transmission chain,
tighten the rear axle nut 3 and the lock nut 1 and
then reconfirm the tightness of the transmission chain.
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
The drive chain of this motorcycle is made
of special materials carefully processed.
authentic parts (428HS 134 links) when replacing
the drive chain.
specifications may cause early damage to the
chain.
NOTE: Each time when replacing the drive chain, please
check the abrasion conditions of both the front and
rear sprockets, replace sprockets at the same time if
20–30 mm
necessary.
NOTE: When installing drive chain,
make sure the opening direction of
lock ring is the opposite direction of
the chain movement.
NOTE: After adjusting the drive chain, ensure that you
have checked the free stroke of the rear brake pedal.
Refer to "BRAKES" section in this manual.
BRAKES (DISC BRAKE)
The front wheel and rear wheel of the motorcycle use the
hydraulic disc brakes. Correct brake operation is very
important for safe riding. Be sure to have the brake system
checked regularly. This check should be made by an
authorized dealer.
49
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
BCAUTION
Using parts with different
(123)
Use
EN
(123)
Publicité
